Designed to Fit. Installed to Last.
Follow our step-by-step installation guide to ensure a precise fit, secure placement, and reliable performance for years to come.
Prepare the following tools and materials before beginning to ensure a smooth, accurate, and secure installation.
Safety Glasses
Marker
Silicone Adhesive Sealant
Tape Measure
Jigsaw
Rags
Wood Support Blocks
Level
Screws
Bladed Screwdriver
1
- Confirm that the cutout template matches the actual sink size.
- Place the template in the desired location on the countertop.
- Secure it if needed, then trace the outline with a pencil.
2
- Cut along the traced outline using the proper saw for your counter top material.
3
- Turn the counter top over and drill 3/8" diameter x 1/2" deep holes, positioned 1/2" from the sink edge.
- Insert the anchors and lightly tap them with a hammer until flush.
4
- Apply a continuous bead of silicone around the sink rim on the underside of the counter top.
- Align the sink with the cutout and press it firmly into place.
5
- Install the fixing clamps and screws to secure the sink to the countertop.
- Remove any excess sealant around the rim.
- Allow the sealant to cure for 30-60 minutes.
6
- Connect the drain assembly to the sink, then attach the trap.
- Connect the water supply lines to the faucet following the manufacturer's instructions.
- Run water and check all connections for leaks.
